Tag Archives: ferroelectrics

Domain wall motion in Pb(Zr0.20Ti0.80)O3 epitaxial thin films

A NANOSENSORS AdvancedTEC ATEC-EFM PtIr coated AFM probe was used for the piezo force microscopy (PFM) characterization in this interesting paper by Borderon et.al Domain wall motion in Pb(Zr0.20Ti0.80)O3 epitaxial thin films published in Nature Communications.

Figure 1 from Borderon et al. Domain wall motion in Pb(Zr0.20Ti0.80)O3 epitaxial thin films: Piezoelectric Force Microscopy (PFM) characterization of the epitaxial PZT thin films. The scan size is 2 μm×1 μm for the c-domain ample and 1 μm × 0.5 μm for the a/c-domain sample. PFM characterization done with ATEC-EFM AFM probe
Figure 1 from Borderon et.al Domain wall motion in Pb(Zr0.20Ti0.80)O3 epitaxial thin films: Piezoelectric Force Microscopy (PFM) characterization of the epitaxial PZT thin films. The scan size is 2 μm×1
μm for the c-domain ample and 1 μm × 0.5 μm for the a/c-domain sample.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C. Borderon, A. E. Brunier, K. Nadaud, R. Renoud, M. Alexe, H. W. Gundel
Domain wall motion in Pb(Zr0.20Ti0.80)O3 epitaxial thin films
Nature Scientific Reports, volume 7, Article number: 3444 (2017)
doi: https://doi.org/10.1038/s41598-017-03757-y

To read the full article please follow this external link: https://rdcu.be/5qTo

Open Access:  The article  Domain wall motion in Pb(Zr0.20Ti0.80)O3 epitaxial thin films  by Borderon et.al is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing,  adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/