Tag Archives: organic solar cells

Nontoxic pyrite iron sulfide nanocrystals as second electron acceptor in PTB7:PC71BM-based organic photovoltaic cells

Iron disulfide ( FeS2 ) is a natural earth-abundant and nontoxic material with possible applications in lithium batteries, transistors or photovoltaic (PV) devices. According to the analysis carried out by Wadia et al., among 23 semiconducting materials, FeS2 is the best candidate for the development of large-scale solar cells at low cost (<2 × 10−6 ¢/W). Furthermore, FeS2 exhibits excellent optoelectronic properties such as a band gap of 0.8 to 1.38 eV, a high optical absorption coefficient (2 × 105 cm−1), high carrier mobility (2 to 80 cm2/Vs) and a large charge carrier lifetime (200 ps). Therefore, FeS2 nanoparticles (NPs) can be a good alternative for PV applications.*

In “Nontoxic pyrite iron sulfide nanocrystals as second electron acceptor in PTB7:PC71BM-based organic photovoltaic cells “ Olivia Amargós-Reyes, José-Luis Maldonado, Omar Martínez-Alvarez, María-Elena Nicho, José Santos-Cruz, Juan Nicasio-Collazo, Irving Caballero-Quintana and Concepción Arenas-Arrocena report the synthesis of nontoxic pyrite iron sulfide ( FeS2 ) nanocrystals (NCs) using a two-pot method. Moreover, they study the influence of these NCs incorporated into the PTB7:PC71BM active layer of bulk-heterojunction ternary organic photovoltaic ( OPV ) cells.*

The AFM roughness images presented in this article were acquired in dynamic force mode using NANOSENSORS™ PointProbe® Plus PPP-NCLAu AFM probes.

Figure 7 from “Nontoxic pyrite iron sulfide nanocrystals as second electron acceptor in PTB7:PC71BM-based organic photovoltaic cells” shows the 2D (left) and 3D (right) AFM images of the OPVs with different concentrations of FeS2 recorded in the noncontact mode. The roughness of the OPV surface is increased gradually as the FeS2 concentration increases (Table 1 and Figure 7), such that traps for the charge carriers could occur and the leakage current could increase. Because of the FeS2 agglomerates, the OPV parameters tend to decrease, free charges cannot be efficiently extracted. This effect is most prominent for the OPV cells with 1% of FeS2 (Figure 7 and Supporting Information File 1, Figure S2d).
Figure 7 from “Nontoxic pyrite iron sulfide nanocrystals as second electron acceptor in PTB7:PC71BM-based organic photovoltaic cells” by Olivia Amargós-Reyes et al.:
2D (left) and 3D (right) AFM images of the OPVs with different concentrations of FeS2
(a) 0.0 wt %, b) 0.25 wt %, c) 0.5 wt % and d) 1.0 wt %) recorded in noncontact mode.

*Olivia Amargós-Reyes, José-Luis Maldonado, Omar Martínez-Alvarez, María-Elena Nicho, José Santos-Cruz, Juan Nicasio-Collazo, Irving Caballero-Quintana and Concepción Arenas-Arrocena
Nontoxic pyrite iron sulfide nanocrystals as second electron acceptor in PTB7:PC71BM-based organic photovoltaic cells
Beilstein Journal of . Nanotechnology 2019, 10, 2238–2250.
DOI: doi:10.3762/bjnano.10.216

Please follow this external link to read the full article: https://www.beilstein-journals.org/bjnano/articles/10/216#R65

Open Access: The article “Nontoxic pyrite iron sulfide nanocrystals as second electron acceptor in PTB7:PC71BM-based organic photovoltaic cells” by Olivia Amargós-Reyes, José-Luis Maldonado, Omar Martínez-Alvarez, María-Elena Nicho, José Santos-Cruz, Juan Nicasio-Collazo, Irving Caballero-Quintana and Concepción Arenas-Arrocena is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

Highly efficient fullerene and non-fullerene based ternary organic solar cells incorporating a new tetrathiocin-cored semiconductor

Organic photovoltaic (OPV) devices based on nanocomposites of π-conjugated semiconductors are a prospective solar cell technology and have attracted considerable attention due to unprecedented attributes such as printability, foldability, portability, wearability, semi-transparency and amenability to cost-effective large area fabrication. Extensive and focussed research to enhance the power conversion efficiency (PCE) of organic solar cells have led to the development of highly efficient bulk heterojunction (BHJ) single and multijunction organic solar cells with PCEs > 15%.*

In the paper “Highly efficient fullerene and non-fullerene based ternary organic solar cells incorporating a new tetrathiocin-cored semiconductor” Lethy Krishnan Jagadamma, Rupert G. D. Taylor, Alexander L. Kanibolotsky, Muhammad Tariq Sajjad, Iain A. Wright, Peter N. Horton, Simon J. Coles, Ifor D. W. Samuel and Peter J. Skabara present a dual-chain oligothiophene-based organic semiconductor, EH-5T-TTC.*

Detailed characterisation of the ternary blend systems as presented in the paper implies that the ternary small molecule EH-5T-TTC functions differently in polymer: fullerene and polymer: non-fullerene blends and has dual functions of morphology modification and complementary spectral absorption.*

To understand the differences in recombination dynamics of the blends containing EH-5T-TTC and fullerene/non-fullerene acceptors, detailed morphological characterisation was performed using atomic force microscopy (AFM).*

NANOSENSORS™ PointProbe® Plus PPP-NCSTR silicon AFM probes with typical force constant of 7.4 Nm−1 were used for the AFM height images presented in the paper.

Fig. 7 from “Highly efficient fullerene and non-fullerene based ternary organic solar cells incorporating a new tetrathiocin-cored semiconductor”:
AFM height images of the binary and ternary blends of PTB7-Th:EH-IDTBR and PTB7-Th:PC71BM. (a) Binary PTB7-Th:EH-IDTBR (b) ternary PTB7-Th:EH-IDTBR:EH-5T-TTC (c) binary PTB7-Th:PC71BM and (d) ternary PTB7-Th:PC71BM:EH-5T-TTC.

*Lethy Krishnan Jagadamma, Rupert G. D. Taylor, Alexander L. Kanibolotsky, Muhammad Tariq Sajjad, Iain A. Wright, Peter N. Horton, Simon J. Coles, Ifor D. W. Samuel and Peter J. Skabara
Highly efficient fullerene and non-fullerene based ternary organic solar cells incorporating a new tetrathiocin-cored semiconductor
Sustainable Energy Fuels, 2019, 3, 2087-2099
DOI: 10.1039/C9SE00343F (Paper)

Please follow this external link to read the full article: https://pubs.rsc.org/lv/content/articlehtml/2019/se/c9se00343f

Open Access: The article “Highly efficient fullerene and non-fullerene based ternary organic solar cells incorporating a new tetrathiocin-cored semiconductor” by Lethy Krishnan Jagadamma, Rupert G. D. Taylor, Alexander L. Kanibolotsky, Muhammad Tariq Sajjad, Iain A. Wright, Peter N. Horton, Simon J. Coles, Ifor D. W. Samuel and Peter J. Skabara is licensed under a Creative Commons Attribution 3.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/3.0/.