How To Buy


PLateau Tip - Force Modulation Mode - Reflex Coating

The Plateau Tip series based on the well-established NANOSENSORS™ Silicon-SPM-Probes exhibit an intentionally blunt tip with a well-defined circular end-face located at the free end of a micromechanical cantilever. This plateau is formed by focused ion beam milling out of a symmetrically etched tip building a rod on top of a conical tip.

The PL2-FM type is offered for force modulation microscopy. The force constant of this AFM probe spans the gap between contact and non-contact mode and is specially tailored for the force modulation mode. Furthermore non-contact or tapping mode operation is possible with the FM tip but with reduced operation stability.

Upon request customized larger plateau diameters can be realized. Other shapes are also possible upon request.

The probe offers unique features:

Cantilever data:

Property Nominal Value Specified Range
Thickness /µm 3 2.0 - 4.0
Mean Width /µm 28 20 - 35
Length /µm 225 215 - 235
Force Constant /(N/m) 2.8 0.5 - 9.5
Resonance Frequency /kHz 75 45 - 115
Technical Data Tip Value
Plateau diameter (*) /µm 1.8 ± 0.5
Plateau rod height /µm > 2.0
Plateau edge radius /µm 0.2 - 0.4
Tip height (overall) /µm 10 - 15

Order codes and shipping units:

Order Code Number of AFM probes per pack Data sheet Coating
PL2-FMR-10 10 of all probes reflex

For further information please contact your local distributor or NANOSENSORS™ directly.
NANOSENSORS™ is a trademark of NanoWorld AG / /

NANOSENSORS™ is a trademark of NanoWorld AG - Copyright by NanoWorld AG