How To Buy

qp-HBC

uniqprobe - HeartBeatCantilever – for ScanAsyst** and Peak Force Tapping**

NANOSENORS qp-HBC AFM probes are designed for use in ScanAsyst® or PeakForceTapping™** in air. The qp-HBC probes are also compatible for contact and non-contact or soft tapping mode AFM imaging The combination of soft cantilever and fairly high resonance frequency enables stable and fast measurements with reduced tip-sample interaction.

The NANOSENSORS uniqprobe combines the well-known features of the other NANOSENSORS AFM probe series such as high application versatility and compatibility with most commercial SPMs with the additional advantage of a strongly reduced dispersion of force constant and resonance frequency.

The unsurpassed uniformity of the mechanical characteristics of the uniqprobe series is particularly important for applications, where a large number of probes with known and near identical force constants or resonance frequencies are needed.

**PeakForce Tapping™ and ScanAsyst® are registered trademarks of Bruker Corporation.

The probe offers unique features:

Cantilever data:

Property Nominal Value Specified Range
Resonance Frequency /kHz 60 45 - 75
Force Constant /(N/m) 0.5 0.35 - 0.8
Thickness /m 0 0.0 - 0.0
Mean Width /µm 25 24 - 26
Length /µm 115 110 - 120

Order codes and shipping units:

Order Code Number of AFM probes per pack Data sheet Coating
qp-HBC-10 10 without partial Au coating
qp-HBC-20 20 without partial Au coating
qp-HBC-50 50 without partial Au coating


 

Special handling information for NANOSENSORS™ uniqprobes

Due to their unique geometry the tips of the uniqprobes are more susceptible to tip damage by electrostatic discharge (ESD) than other Silicon-SPM-Probes.

Electric fields near the probe chip may lead to field evaporation which can blunt the tip apex of the probe tip. Therefore the NANOSENSORS™ uniqprobes are shipped in specially designed ESD-safe chip carriers.

NANOSENSORS™ recommends to their customers to take appropriate precautions to avoid tip damage due to electrostatic discharge when handling the probes. This can for example be done by using anti-electrostatic mats, wrist bands and tweezers.

Product screencast NANOSENSORS™ uniqprobe AFM Probes series

Please watch the new Product Screencast on the NANOSENSORS™ uniqprobe AFM Probes series by product developer Dr. Laure Aeschimann at YouTube
Please subscribe to the NANOSENSORS Youtube Channel.


For further information please contact your local distributor or NANOSENSORS™ directly.
NANOSENSORS™ is a trademark of NanoWorld AG / info@nanosensors.com / www.nanosensors.com


NANOSENSORS™ is a trademark of NanoWorld AG - Copyright by NanoWorld AG