PPP-NCL
Point Probe® Plus Non-Contact /Tapping Mode - Long Cantilever
The new PointProbe® Plus (PPP) combines the well-known features of the proven PointProbe® series such as high application versatility and compatibility with most commercial SPMs with a further reduced and more reproducible tip radius as well as a more defined tip shape. The typical tip radius of less than 7 nm and the minimized variation in tip shape provide more reproducible images and enhanced resolution.
NANOSENSORS™ PPP-NCL AFM probes are designed for non-contact mode or tapping mode AFM (also known as: attractive or dynamic mode). The NCL type is offered as an alternative to NANOSENSORS™ high frequency non contact type (NCH). PPP-NCL is recommended if the feedback loop of the microscope does not accept high frequencies (400 kHz) or if the detection system needs a minimum cantilever length > 125 µm. Compared to the high frequency non-contact type NCH the maximum scanning speed is slightly reduced. This probe type combines high operation stability with outstanding sensitivity and fast scanning ability.
NANOSENSORS™ PPP-NCL AFM probes are designed for non-contact mode or tapping mode AFM (also known as: attractive or dynamic mode). The NCL type is offered as an alternative to NANOSENSORS™ high frequency non contact type (NCH). PPP-NCL is recommended if the feedback loop of the microscope does not accept high frequencies (400 kHz) or if the detection system needs a minimum cantilever length > 125 µm. Compared to the high frequency non-contact type NCH the maximum scanning speed is slightly reduced. This probe type combines high operation stability with outstanding sensitivity and fast scanning ability.
- The probe offers unique features:
- - guaranteed tip radius of curvature < 10 nm
- - highly doped to dissipate static charge
- - chemically inert
- - high mechanical Q-factor for high sensitivity
- - alignment grooves on backside of silicon holder chip
- - precise alignment of the cantilever position (within +/- 2 µm) in conjunction with the usage
of the alignment chip - - compatible with PointProbe® Plus XY-Alignment Series
Cantilever data:
| Technical Data | Nominal Value | Specified Range |
|---|---|---|
| Thickness /µm | 7 | 6.0 - 8.0 |
| Mean Width /µm | 38 | 30 - 45 |
| Length /µm | 225 | 215 - 235 |
| Force Constant /(N/m) | 48 | 21 - 98 |
| Resonance Frequency /kHz | 190 | 146 - 236 |
Order codes and shipping units:
| Order Code | Quantity | Data Sheet | Coating |
|---|---|---|---|
| PPP-NCL-10 | 10 | of all probes | without |
| PPP-NCL-20 | 20 | of all probes | without |
| PPP-NCL-50 | 50 | without | without |
| PPP-NCL-W | > 380 | of up to 32 probes | without |
For further information please contact your local distributor or NANOSENSORS™ directly.
NANOSENSORS™ is a trademark of NanoWorld AG / info@nanosensors.com / www.nanosensors.com
NANOSENSORS™ is a trademark of NanoWorld AG / info@nanosensors.com / www.nanosensors.com