{"id":4207,"date":"2018-11-19T10:53:18","date_gmt":"2018-11-19T08:53:18","guid":{"rendered":"https:\/\/nanosensors.com\/blog\/observing-single-magnetite-nanoparticles-with-a-diameter-of-10nm-by-using-nanosensors-sss-mfmr-afm-probes\/"},"modified":"2023-03-15T14:53:13","modified_gmt":"2023-03-15T12:53:13","slug":"observing-single-magnetite-nanoparticles-with-a-diameter-of-10nm-by-using-nanosensors-sss-mfmr-afm-probes","status":"publish","type":"post","link":"https:\/\/www.nanosensors.com\/blog\/observing-single-magnetite-nanoparticles-with-a-diameter-of-10nm-by-using-nanosensors-sss-mfmr-afm-probes\/","title":{"rendered":"Observing single magnetite nanoparticles with a diameter of 10nm by using NANOSENSORS SSS-MFMR AFM probes"},"content":{"rendered":"

In their publication \u201cUnderstanding electrostatic and magnetic forces in magnetic force microscopy: towards single supermagnetic nanoparticle resolution\u201d Alexander Krivcov, Tanja Junkers and Hildegard M\u00f6bius describe methods to suppress capacitive coupling effects in MFM hiding the magnetic signal of magnetic nanoparticles.<\/p>\n

During MFM measurements performed in an interleave mode moving the tip at a certain distance to the sample surface the tip is exposed not only to magnetic forces but to electrostatic forces between tip and substrates. In case of analyzing nanoparticles laying on a flat substrate, the electrostatic forces changes noticeably with increasing tip to substrate distance whenever the tip is retracted over a nanoparticle. This capacitive signal may overwhelm the magnetic signal that should be detected instead.<\/p>\n

The authors propose several approaches to reduce these capacitive signals. The change in electrostatic forces could be minimized by avoiding retraction of tip over the nanoparticle. Therefore, it is proposed to use interleave linear mode following a linear approximation of the sample surface instead of the interleave lift mode following the sample surface as measured. By that, changes in distance between sample substrate and tip at the nanoparticles are avoided. Moreover, they propose using a substrate with a work function comparable to that of the tip in order to reduce electrostatic forces, in general. By applying an appropriate tip bias remaining electrostatic forces could compensated and further suppressed. Finally, the authors suggest using a tip that is as sharp as possible for decreasing the area of the capacitor and NANOSENSORS SSS-MFMR<\/a> probes are the best choice for this.<\/p>\n

The impact of the above mentioned optimizations have been validated experimentally by the authors. Finally, it turned out that if using super sharp magnetic tips further methods suppressing capacitive effects were not necessary. The authors were able to detect superparamagnetic nanoparticles at the single particle level on copper substrate with a NANOSENSORS SSS-MFMR<\/a> probe without using additional parameters as e. g. tip bias or external magnetic field.\"Figure<\/a><\/p>\n

Figure 12  from: A. Krivcov et. al, Understanding electrostatic and magnetic forces in magnetic force microscopy: towards single supermagnetic nanoparticle resolution<\/em>: Figure 12.<\/strong> (a) topography of copper substrate with single magnetite nanoparticle; (b) phase image in 11 nm lift height with an attraction at the place of the nanoparticle; (c) Cross section of a single magnetite nanoparticle (dotted line in (a)) with 10 nm diameter taken on copper substrate with SSS-MFMR tip<\/a><\/p>\n

A. Krivcov, T. Junkers, and H. M\u00f6bius
\nUnderstanding electrostatic and magnetic forces in magnetic force microscopy: towards single superparamagnetic nanoparticle resolution<\/strong>
\nJ. Phys. Commun., vol. 2, no. 7, p. 075019, 2018
\nDOI: https:\/\/doi.org\/10.1088\/2399-6528\/aad3a4<\/a><\/p>\n

The article \u201cUnderstanding electrostatic and magnetic forces in magnetic force microscopy: towards single superparamagnetic nanoparticle resolution\u201d by A. Krivcov, T. Junkers, and H. M\u00f6bius is licensed under the Creative Commons Attribution 3.0 License. To view a copy of this license, visit http:\/\/creativecommons.org\/licenses\/by\/3.0.<\/p>\n","protected":false},"excerpt":{"rendered":"

In their publication \u201cUnderstanding electrostatic and magnetic forces in magnetic force microscopy: towards single supermagnetic nanoparticle resolution\u201d Alexander Krivcov, Tanja Junkers and Hildegard M\u00f6bius describe methods to suppress capacitive coupling effects in MFM hiding the magnetic signal of magnetic nanoparticles. During MFM measurements performed in an interleave mode moving the tip at a certain distance… Read More »Observing single magnetite nanoparticles with a diameter of 10nm by using NANOSENSORS SSS-MFMR AFM probes<\/span><\/a><\/p>\n","protected":false},"author":2,"featured_media":4208,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"neve_meta_sidebar":"","neve_meta_container":"","neve_meta_enable_content_width":"","neve_meta_content_width":0,"neve_meta_title_alignment":"","neve_meta_author_avatar":"","neve_post_elements_order":"","neve_meta_disable_header":"","neve_meta_disable_footer":"","neve_meta_disable_title":"","footnotes":""},"categories":[16],"tags":[192,180,31,193,592,591,519,182,229,230,473,474,518,532],"class_list":{"0":"post-4207","1":"post","2":"type-post","3":"status-publish","4":"format-standard","5":"has-post-thumbnail","6":"hentry","7":"category-science-technology","8":"tag-magnetic-ac-mode","9":"tag-magnetic-force-microscopy","10":"tag-magnetic-force-microscopy-probe","11":"tag-magnetic-properties-and-materials","12":"tag-mfm","15":"tag-nanoparticles","16":"tag-sss-mfmr","17":"tag-superparamagnetic-nanoparticles","18":"tag-473","19":"tag-474","20":"tag-518","21":"tag-532"},"_links":{"self":[{"href":"https:\/\/www.nanosensors.com\/blog\/wp-json\/wp\/v2\/posts\/4207","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.nanosensors.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.nanosensors.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.nanosensors.com\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.nanosensors.com\/blog\/wp-json\/wp\/v2\/comments?post=4207"}],"version-history":[{"count":0,"href":"https:\/\/www.nanosensors.com\/blog\/wp-json\/wp\/v2\/posts\/4207\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.nanosensors.com\/blog\/wp-json\/wp\/v2\/media\/4208"}],"wp:attachment":[{"href":"https:\/\/www.nanosensors.com\/blog\/wp-json\/wp\/v2\/media?parent=4207"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.nanosensors.com\/blog\/wp-json\/wp\/v2\/categories?post=4207"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.nanosensors.com\/blog\/wp-json\/wp\/v2\/tags?post=4207"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}