NANOSENSORS™ AR10T-NCH AFM tips are designed for non-contact mode or tapping mode AFM. This probe type combines high operation stability with outstanding sensitivity and fast scanning ability.
For measurements on samples with sidewall angles approaching 90° NANOSENSORS™ produces specially tailored tips. These tips are FIB (Focused Ion Beam) milled to achieve a high aspect ratio portion better than 10:1 at the end of the common silicon tip. This subtractive method of producing the high aspect ratio needle offers the advantage of high lateral stiffness and rigidity of the tip.
On the model AR10T the last 1.5 µm of the tip are tilted 13° to the center axis of the cantilever. With this feature the tilt angle of the cantilever caused by the mount of the AFM head (commonly 13°) will be compensated. Now, nearly vertical sidewalls can be measured offering a symmetrical scan.
|Property||Nominal Value||Specified Range|
|Thickness /µm||4||3.0 - 5.0|
|Mean Width /µm||30||22.5 - 37.5|
|Length /µm||125||115 - 135|
|Force Constant /(N/m)||42||10 - 130|
|Resonance Frequency /kHz||330||204 - 497|
|Order Code||Number of AFM probes per pack||Data sheet||Coating|
|AR10T-NCH-10||10||of all probes||none|
|AR10T-NCH-20||20||of all probes||none|
|AR10T-NCH-W||> 370||of all probes||none|
Product Screencast on the NANOSENSORS™ High Aspect Ratio Silicon AFM Probes by product developer Dr. Oliver Krause.
Please subscribe to the NANOSENSORS Youtube Channel.